Service manual

QMS 3260/4032 Laser Printer - Base Engine Technical Manual 10-13
Release Version 11-97
Removal and Replacement Procedures
RRP 1.5 Control Panel (PL1.1)
Removal
1. Remove the Top Cover
(
RRP 1.2
)
.
2. Disconnect the J417 from the Control Panel.
3. Push in on the four tabs securin
g
the Control Panel to the Top Cover, while
y
ou press the Control
Panel out of the Cover.
Replacement
1. Position the Control Panel over the openin
g
in the Top Cover Assembl
y
, and press the Panel into the
openin
g
.
The Panel snaps into place.
2. Reconnect J417.
3. Reinstall the Top Cover
(
RRP 1.2
)
.