Service manual

6 QMS 3260/4032 Laser Printer - Base Engine Technical Manual
Release Version 11-97
Section 1. Service Flowchart
If you choose to use this technical manual as a service manual, we have included a Ser-
vice Flowchart that outlines one possible approach to troubleshooting and repair of the
printer. The Service Flowchart is merely an overview of the path a service technician could
take, using this technical manual, to service the QMS 3260/4032 base printer engine and
options.
To use the Service Flowchart, start at Block 1 to identify the problem. After you have identified the problem,
return to the Service Flowchart and proceed to Block 2 where you inspect and clean the printer (a through
cleaning frequently solves many printer problems). You continue down the Flowchart, in this manner,
always returning to the next block in the Service Flowchart after you have completed the tasks outlined in
the current block.
If you choose not to use the Service Flowchart, we recommend that you start at the appropriate Fault Iso-
lation Procedure (FIP) Flowchart and proceed from there. In many cases, merely replacing the Print Car-