Service manual

8-
6 QMS 3260/4032 Laser Printer - Base Engine Technical Manual
Release Version 11-97
Running Printer Diagnostics
Output Test table continued
Chain
(Routine)
Function
(Subroutine)
Switches on the... Comments
836
Duplex Module Exit Gate Solenoid Switches off after 3 seconds
837
Duplex Module Wait Clutch Switches off after 3 seconds
838
Duplex Module Drive Motor at slow speed
839
Duplex Module Drive Motor at fast speed
850
Invert Clutch CW Controlled by the Duplex Module
Switches off after 3 seconds
851
Invert Clutch CCW Switches off after 3 seconds
91
Main Motor (alternate)
921
Developer Bias Switches on the HVPS - Developer Bias
923
BCR (AC) voltage Switches on the HVPS - BCR (AC)
924
BCR (DC) voltage Switches on the HVPS - BCR (DC)
926
BTR voltage change in SEL Switches on the HVPS - BTR
927
DTS voltage Switches on the HVPS - Detack
929
BTR RMT voltage change Switches on the HVPS - BTR (+DC)
10 4
Fuser Fan Motor from mid to high speed
10 6
Offset Motor (forward)
10 7
Offset Motor (reverse)
10 50
Face Up Exit Clutch Controlled by the Duplex Module
10 51
Exit Gate Solenoid Switches the Gate to the Face Up Tray
10 53
Invert Clutch CW and Face Up Exit Clutch Controlled by the MCU PWB
11 3
Mailbox Motor
11 13
Gate IN Solenoid -Pull Opens IN Gate. Switch off test after 5 seconds
11 15
BIN 2 Gate Solenoid Opens Gate 2. Switch off test after 5 seconds
11 16
BIN 3 Gate Solenoid Opens Gate 3. Switch off test after 5 seconds