Service manual

5-20 QMS 3260/4032 Laser Printer - Base Engine Technical Manual

Release Version 11-97

Primary Fault Isolation Procedures

5.8 Spot Deletions continued

Step Actions and Questions Yes No

FUSER INSPECTION

1. Generate another Black Test Print and switch OFF printer

power when the print is halfway through the Fuser.

2. Open the Left Upper Cover.

3. Examine the paper areas before the image enters the

Fuser and after the image exits the Fuser.

Is the image on the paper normal before it enters the

Fuser, but there are spot deletions visible when it exits the

Fuser?

Replace the

Fuser Assem-

bly (RRP 6.1)

Replace the

paper with

fresh, dry

paper.

If problem

continues,

thoroughly

clean the

inside of the

printer.