Specifications

/&
4
4 ,
(
If, after you clear a media jam, the jam message in the control panel window persists,
open and close the printer’s left door. This should clear the jam message.
If automatic jam recovery is enabled (Administration/Engine/Page Recovery menu),
once the jammed media is removed and the printer is operational, the printer should
resume printing the job from the page where the jam occurred.
»Note:
When clearing jams from the multipurpose tray or the envelope feeder you must
reload paper or envelopes to clear the jam message. Just opening the printer door will
not clear the message.
▲ Caution: To avoid damage to rollers or internal printer components, always remove
jammed media gently. Always try to remove jammed media without tearing it. Any
pieces of media left in the printer, whether large or small, can obstruct the paper path
and cause further jams.
/.
8<
Exit jams occur between the fuser and the exit area. These jams are accessed
through the upper left cover.
1 Open the upper-left
cover of the printer.