Specifications

+&#

#

4 





 Make sure you’ve loaded the media printing-side up. Many manufacturers place an

arrow on the end of the wrapper to indicate the printing side. If you can’t determine

which side of the media to print on, remove the media from the tray, rotate the stack

a half-turn, turn the stack over, and then place it back in the tray.

/##

Understanding the printer’s media path will help you locate media jams. The media path

is different for the different printer options. Refer to the following illustrations to view the

path depending on the options installed.

/

Media is picked up or fed (1) from

one of two input trays or the multipur-

pose tray. It is then transported to the

imaging area (2) where toner is

applied. Then it continues to the

fuser (3) where the toner is melted

into the surface of the media. The

media exits (4) the printer and is

stacked in the face-down bin.