Specifications




This chapter explains automatic jam recovery, discusses how to prevent media jams,
and then provides detailed information on how to find and remove media jams.
(
The QMS 3260/4032 Print System provides automatic jam recovery (when enabled
through the Administration/Engine/Page Recovery menu). After you remove any
jammed media, printing automatically resumes from the page the printer stopped at
when the jam occurred.
»Note:
For automatic jam recovery to work, it is necessary to leave the printer turned
on when you remove the jammed media.

There are several things you can do to reduce the occurrence of media jams.


 Use paper, envelopes, labels, and transparencies that match the printer specifica-
tions.


 Make sure the media is not folded, wrinkled, or excessively curled.


 Do not overfill the media tray. The tray has a fill-limit mark on the inside left side.


 If you have problems with double feeding, remove the media from the tray and fan
the sheets. They may be sticking together.
»Note:
Do not fan transparencies since this causes static.


 Store media in a dry location away from excessive heat, moisture, and humidity.