Specifications
$&#
' .
"#
Paper dust may accumulate inside the printer. This could affect the printer’s perfor-
mance. To prevent any potential problems associated with this, you should clean your
printer on a regular basis. You need to clean both the inside and outside of the printer.
WARNING!
Turn off the printer, unplug the power cord, and disconnect all interface
cables before cleaning. Do not spill water or detergent into the printer; otherwise the
printer will be damaged and an electric shock may occur.
ACHTUNG!
Ziehen Sie den Netzstecker aus der Steckdose bevor Sie den Drucker
reinigen. Versch
ü
tten Sie kein Wasser oder andere Fl
ü
ssigkeiten auf dem Drucker, da
das Ger
ä
t sonst besch
ä
digt wird oder die Gefahr eines elektrischen Schlages besteht.
To protect your printer and maintain its appearance, clean the exterior about once a
month. Use the following guidelines:
Use only a dry or slightly damp, lint-free, soft cloth moistened only with water with
water. For stubborn stains, dampen the cloth with a mild detergent solution before
cleaning. Finish by wiping the printer with a soft, dry cloth.
Never use cleaning solutions that contain solvents, such as alcohol and benzene.
Solvents may damage the printer’s finish.
Always test any cleaning solution on a small area of your printer to check the solu-
tion's performance.
Never use sharp or rough implements, such as wire or plastic cleaning pads.
Never spray a cleaning solution directly on the printer as the cleaning solution will
penetrate to the interior of the printer and cause damage.
!
Either clean the printer before use, or allow a few minutes after unplugging it to
allow the fusing unit to cool down.
Turn off the printer, unplug the power cord, and disconnect all interface cables
before cleaning inside the printer.