Specifications

+&#
#
-
#"
1 Load labels in the multipurpose tray the same way you load paper.
»Note:
If your label stock has a top-of-page, place the top-of-page toward the rear
of the printer.
2 In the Operator Control/Multipurpose Sz menu, select the correct label
paper size.
»Note:
The top sheet in the tray will be the first sheet printed for your job.

$$


 Load letterhead and memo media the same way you would load paper.
»Note:
Load the media printing-side up with the top of the media (the letterhead or
memo information) toward the front of the tray.

Formatting
Format letterhead or memo data within your application. Try printing your data on a
plain sheet of paper first to check placement.
Input Source
Trays 2,3, or 5
Capacity
Up to 500 sheets, depending on the thickness of the media
Type
Refer to the specifications in chapter 4, “Print Media,” in the
Reference.
Notes


 Check your application documentation for other information about printing
on letterhead and memo media.


 The top sheet in the tray will be the first sheet printed for your job.
Formatting
Format the information to be printed on the transparencies within your
application. Try printing your data on a plain sheet of paper first to check
placement.