Specifications

+&#
#
' ,
4 While lifting the envelope
weight, insert the enve-
lopes with the flap-side up
and the long edge leading
first.
5 Slide the side guide so that
it slightly touches the edges of the
envelope stack.
▲ Caution
: Make sure the envelopes
do not exceed the limit mark. Do not
add envelopes while printing;
otherwise, jams may result.
6 Open the flap of each envelope
immediately (before it cools) after
the envelope is delivered to the
output tray.
»Note:
Because the envelopes pass through heated rollers, the gummed area on
the flaps may seal. Using envelopes with emulsion-based glue avoids this
problem.

Formatting
Format label data within your application. Try printing your data on a plain sheet
of paper first to check placement.
Input Source
Multipurpose Tray
Capacity
Up to 50, depending on the thickness of the labels
Type
Refer to the specifications in chapter 4, “Print Media,” in the
Reference.
Notes


 Avoid using labels with exposed adhesive; it may stick to the toner cartridge
or the fixing roller, causing labels to peel off and media jams to occur.


 Check your application documentation for other information on printing labels.