Specifications
If you need to relocate or ship your printer after it’s been installed, you must follow the
procedures in this chapter to prevent damage to the printer and to keep your warranty
valid.
▲ Caution:
QMS cannot be held responsible for damage to your printer during shipment
that results from the improper packaging of your printer. You must use the instructions
given in this section before repacking the printer in its original shipping carton with the
original packing materials.
If you need replacement packaging, in the US call QMS National Service at 1 (334)
633-4300 x 2530 and request catalog number 2600439-200. If you need to return the
printer for service, in the US call QMS Customer Service at 1 (334) 633-1072 for an
RMA (Return Merchandise Authorization) number before shipping the printer. In other
countries, refer to appendix A, “QMS Customer Support.”
+2!)
Repacking your printer involves removing all of the options from the printer, then plac-
ing the printer back into the original carton. You may not have all of the options
installed on your printer. Therefore, skip the steps or sections describing removal of
the options that you don’t have on your printer and begin on the next step.
2!!71
1 Remove the high-capacity output stacker (HCOS).
2 Remove the face-up tray.
3 Remove the duplexer.
4 Remove the envelope feeder and replace the multipurpose tray.
5 Remove the high-capacity input feeder (HCIF).
6 Repack the printer.