Specifications


&
*-
PUT THICK SIZE IN
INPUTBIN BIN
The tray using thick stock or letterhead
is empty.
SIZE is the media size
detected by the engine, and
INPUTBIN
is the empty tray.
Refill the tray
PUT THICK STOCK IN
INPUT BIN
The tray using thick stock or letterhead
is empty.
Refill the tray
PUT TRANSPARENCY IN
INPUT BIN
The tray using transparencies is empty. Refill the tray.
RESETTING
ACCOUNTING
The reset accounting operation is in
process.
No action
needed.
SERVICE CALL # An error has been detected with the
item indicated in the service message.
Correction of
these errors is
performed by
qualified QMS
service
personnel only.
Contact your
QMS vendor.
STAPLE CARTRIDGE
NOT INSTALLED
The staple cartridge is empty or has not
been replaced after refilling.
Refill or replace
the cartridge.
TONER LOW The toner is low. You can set the printer
to continue or stop printing at this
message. There is enough toner left to
approximately 300 pages before the
printer stops.
Redistribute the
toner in the car-
tridge, or
replace the car-
tridge.
TONER OUT The toner is out. The printer stops. Replace the
toner cartridge.
TRANSPORT JAM Media is jammed between the paper
trays and the exit.
Open the covers
and remove the
jammed paper.
This status
message...
means... Do this...