Specifications

CrownNet Setup
CrownAdmin 3
QMS 3260/4032
Troubleshooting
Config. Menus
Support Info.
Main
CrownNet Admin.
Printer Jams
Print Quality
Consumables
Printer Care
Specifications
Printer Features
8 of 34
?
Index
TONER LOW
The toner is low. You can set the printer to continue
or stop printing at this message. There is enough
toner left to approximately 300 pages before the
printer stops.
Redistribute the toner
in the cartridge, or
replace the cartridge.
TONER OUT
The toner is out. The printer stops. Replace the toner
cartridge.
TRANSPORT JAM
Media is jammed between the paper trays and the
exit.
Open the covers and
remove the jammed
paper.
WAITING FOR IDLE
An active job is in process. Access to the menu is
not allowed until the job is finished.
Wait until the print job
is finished and the
printer goes idle.
WAITING ON INPUT
END JOB?
The compiler is waiting on incoming data for the
first job in the queue. The job may not have an
end-of-job indicator and therefore cannot end. The
message clears if more input arrives from the port
or if you press the Cancel key. No other jobs can
be printed until this job has ended.
Wait until the job is
finished and the
printer goes idle to
access the
configuration menu.
WARMING UP
The printer is warming up after it has been turned
on or returned from energy saver mode.
Wait. No other action
needed.
This status message... means... Do this...