Specifications

CrownNet Setup
CrownAdmin 3
QMS 3260/4032
Troubleshooting
Config. Menus
Support Info.
Main
CrownNet Admin.
Printer Jams
Print Quality
Consumables
Printer Care
Specifications
Printer Features
7 of 34
?
Index
PUT SIZE PAPER IN
INPUTBIN BIN
The Operator Control/Chain Inputbins is set to Off
and the displayed tray is empty. Refill it with the
specified size media.
SIZE
is the media size
detected by the engine, and
INPUTBIN
is the
empty tray.
Refill the tray with the
specified size media.
PUT
SIZE TRANS IN
INPUTBIN BIN
The transparency bin is empty. Put more
transparencies in.
PUT PAPER IN INPUT BIN
The input trays are empty. Refill the trays.
PUT THICK
SIZE IN
INPUTBIN BIN
The tray using thick stock or letterhead is empty.
SIZE
is the media size detected by the engine,
and
INPUTBIN
is the empty tray.
Refill the tray
PUT THICK STOCK IN INPUT
BIN
The tray using thick stock or letterhead is empty. Refill the tray
PUT TRANSPARENCY IN
INPUT BIN
The tray using transparencies is empty. Refill the tray.
RESETTING ACCOUNTING
The reset accounting operation is in process. No action needed.
SERVICE CALL #
An error has been detected with the item indicated
in the service message.
Correction of these
errors is performed
by qualified QMS
service personnel
only. Contact your
QMS vendor.
STAPLE CARTRIDGE NOT
INSTALLED
The staple cartridge is empty or has not been
replaced after refilling.
Refill or replace the
cartridge.
This status message... means... Do this...