Specifications

CrownNet Setup
CrownAdmin 3
QMS 3260/4032
Troubleshooting
Config. Menus
Support Info.
Main
CrownNet Admin.
Printer Jams
Print Quality
Consumables
Printer Care
Specifications
Printer Features
6 of 34
?
Index
INITIALIZING
The printer is warming up and getting ready to go
on line.
Wait. No other action
needed.
INPUT IDLE
PRINTING
The printer is on line and printing jobs already in
the queue. No new jobs are arriving at the
communication interfaces.
No action needed.
INPUT BIN JAM
Media has jammed while being pulled from the
specified tray.
Clear the jam from
the specified tray.
INPUT JAM
INPUTBIN BIN
Media has jammed while being pulled from the
specified tray.
INPUTBIN
is the empty tray.
Clear the jam from
the specified tray.
MULTIPURPOSE TRAY NOT
INSTALLED
You have tried to print to the multipurpose tray and
it’s not there.
Install the
multipurpose tray or
use the another tray.
OUTPUT BIN FULL
The output bin is full. Empty the output bin.
OUTPUT JAM
Media has jammed in the output bin. Remove the jam.
PAPER MISMATCH
The paper size specified in the print job is not in
the tray selected.
Make sure the tray
selected and the
paper size match.
PRINTING STATUS
A status page is printing. Wait until after the
status page prints,
and the message
clears.
This status message... means... Do this...