Specifications

CrownNet Setup
CrownAdmin 3
QMS 3260/4032
Troubleshooting
Config. Menus
Support Info.
Main
CrownNet Admin.
Printer Jams
Print Quality
Consumables
Printer Care
Specifications
Printer Features
29 of 34
?
Index
Depending on the media that your new system software is stored, the pro-
cedure for sending the system software to the printer is basically the same
as printing a document. You can download the system software from the
QMS website after contacting our Customer Response Center, or the sys-
tem software can be shipped to you on CD-ROM or diskettes. If you get
diskettes use the following procedure to unzip the system software on the
diskettes using a PC.
Decompressing the System Software from Diskettes
»Note:
It is not necessary to decompress the system software if you downloaded it from
the QMS website or received it on CD-ROM.
1 Switch to the MS-DOS prompt.
2 Create a new directory on your PC. Type
X
:\mkdir
newdir
↵
where
newdir
refers to the name of the new directory where your sys-
tem software will be stored and
X
: is the hard drive designation.
3 Change to this directory. Type
X
:\cd
newdir
4 Insert the printer system software disk in your PC’s 3.5" disk drive.