Specifications

FrameMaker Ver.5.5(PC) Page Pro/Works 25 Troubleshooting
98.10.29
F-8
JAM5 (Paper Separator misfeeds)
•
The Paper Exit Sensor is not activated even after the lapse of a given period of time after
the Synchronizing Sensor has been activated.
•
The Synchronizing Sensor is not deactivated even after the lapse of a given period of
time after it has been activated.
•
When paper is fed from the Multipurpose Tray, Manual Bypass Tray, or 1st Cassette, the
printer recognizes a paper length, in its paper length detection sequence, 260 mm or
more longer than the paper length data transmitted from the controller.
•
During a two-sided print cycle of paper fed from the Multipurpose Tray, Manual Bypass
Tray, or 1st Cassette, the printer recognizes a difference in paper length of ±20 mm or
longer, in its paper length detection sequence, between the detected paper length and
the paper length data transmitted from the controller.
The JAM display is reset when any of the following covers is opened and closed.
•
Right Cover
•
Duplex Unit Cover
•
Expansion Cassette Cover
•
LCC Cover
•
LCC Front Cover
•
5-Bin Mail Bin Cover
•
10-Bin Mail Bin Cover
2-2. JAM Display Reset