Specifications

FrameMaker Ver.5.5(PC) Page Pro/Works 25 Troubleshooting
98.10.29
F-4
Symptom u/s Analysis y/n Action
FATAL ERROR 9 u Is the problem gone
when the power is turned
OFF, then ON?
n To next step.
u Remove the network
card from, and reinstall it
to, the controller board.
n To next step.
u/s Replace the network
card.
n Replace the controller
board.
FATAL ERROR 21 u/s Is the problem gone
when the power is turned
OFF, then ON?
n Replace PWB-A.
FATAL ERROR 22 u/s Is the problem gone
when the power is turned
OFF, then ON?
n Replace PWB-A.
FATAL ERROR 23 u Is the problem gone
when the power is turned
OFF, then ON?
n To next step.
s Check the connectors
and wiring between the
printer head and PWB-A.
n To next step.
s Replace PWB-A. n Replace the printer head.
FATAL ERROR 24 u/s Is the problem gone
when the power is turned
OFF, then ON?
n Replace PWB-A.
FATAL ERROR 25 u Is the problem gone
when the power is turned
OFF, then ON?
n To next step.
s Check the connectors
and wiring between
PWB-A and main motor.
n To next step.
s Replace the main motor. n Replace PWB-A.
FATAL ERROR 26 u Is the problem gone
when the power is turned
OFF, then ON?
n To next step.
s Check the connectors
and wiring between
PWB-A and I/C motor.
n To next step.
s Replace the main motor. n Replace PWB-A.