Specifications
FrameMaker Ver.5.1(PC) SP-411 E: ADJUSTMENTS
98.07.21
E-1
✽
When Control Board PWB-A has been replaced, the print start position in the sub-scan-
ning direction must be adjusted.
1
ADJUSTMENT OF THE PRINT START POSITION IN SUB-SCANNING DIRECTION
1. Remove the Access Cover, Upper Cover, and Con-
trol Board Reinforcement Box.
(See 2-2 of D: DISASSEMBLY AND CLEANING.)
4108D040AA
Leading Edge of Paper
Print Start Position
in Sub-Scanning
Direction
Gap d
Feeding
Direction
2. Turn variable resistor VR1 on PWB-A to adjust gap
d between the leading edge of the paper and print
start position in the sub-scanning direction.
4108D036AB
VR1
–+