Specifications

FrameMaker Ver.5.1(PC) SP-411 DISASSEMBLY AND CLEANING
98.07.21
D-12
Synchronizing Roller
2-6. Removal of the Cooling Fan Motor
2-7. Removal of the Power Unit Cooling Fan Motor
3. From the back side of the Image Transfer Unit,
remove the Front Synchronizing Roller Sensor.
4108D029AA
4. Remove the Paper Dust Remover.
4108D037AA
5. Remove one E-ring and Transport Clutch.
6. Snap off four E-rings, unhook two springs, and
remove four bushings and two gears to remove the
Synchronizing Rollers.
4108D030AC
1. Remove the Image Transfer Unit. (See 2-5.(2).)
2. Remove two screws, unplug one connector, and
remove the Cooling Fan Motor.
4108D031AA
1. Remove the Controller Board. (See 2-3.)
2. Remove two screws, unplug one connector, and
remove the Power Unit Cooling Fan Motor.
4108D032AB