Specifications

FrameMaker Ver.5.1(PC) SP-411 DISASSEMBLY AND CLEANING
98.07.21
D-11
Synchronizing Roller Sensor
2-5. Image Transfer Unit
(1) Removal of the Image Transfer Roller Unit
(2) Removal of Parts
1. Open the Vertical Transport Door.
4108D001AA
2. Raise the Pre-Image Transfer Guide Plate.
1167D061AA
3. Remove the Image Transfer Roller Unit.
NOTE
Do not touch the Image Transfer Roller with bare
hands.
4108D027AA
1. Remove the Image Transfer Roller Unit.
(See 2-5.(1).)
2. Remove one screw, unplug two connectors, and
remove Image Transfer Unit.
NOTE
Because the harness is short, slightly raise the Trans-
fer Unit and unplug the connector before attempting to
remove the Transfer Unit.
4108D028AA