Specifications

FrameMaker Ver.5.1(PC) SP-411 DISASSEMBLY AND CLEANING
98.07.21
D-8
Fusing Heater Lamp
Upper Fusing Roller
9. Remove two screws and the Heater Lamp Holder
(Rear).
10. Pull out the Fusing Heater Lamp.
NOTES
•
Do not touch the glass tube of the Fusing Heater
Lamp with bare hands.
•
When reinstalling Fusing Heater Lamp, ensure that
its side with the lamp voltage marking is on the gear
side.
4108D013AA
11. Remove one screw, harness, and the Fusing
Heater Lamp Holder (Front).
4108D014AA
12. Remove two screws and the Upper Paper Separa-
tor Fingers Assy.
4108D015AA
13. Remove the Roller Pressure Screw at the front,
snap off the E-ring, and remove the Pressure Lever
Assy (yellow).
4108D016AA