Specifications

FrameMaker Ver.5.1(PC) SP-411 DISASSEMBLY AND CLEANING
98.07.21
D-7
Paper Exit Sensor and Actuator
Heater Lamp Cover
(2) Removal of Parts
1. Open the Fusing Unit Cover and remove the Paper
Exit Sensor Cover.
4108D008AA
2. Unplug one connector, and remove the Paper Exit
Sensor.
3. Remove the actuator.
4108D009AB
4. Remove the Fusing Unit. (See 2-4. (1).)
5. Remove one screw and the Fusing Heater Lamp
Front Cover.
4108D010AA
6. Snap off one E-ring and unhook one spring in the
rear and remove the gear assy.
4108D011AA
7. Remove the harness from the Fusing Heater Lamp
Rear Cover.
8. Remove one screw and the Fusing Heater Lamp
Rear Cover.
4108D012AB