Specifications

FrameMaker Ver.5.1(PC) SP-411 DISASSEMBLY AND CLEANING
98.07.21
D-6
2-4. Fusing Unit
(1) Removal of the Fusing Unit
1. Open the Vertical Transport Door.
4108D001AA
2. Remove the Front Cover.
3. Unplug one connector at the front side.
4108D006AA
4. Open the Fusing Unit Cover and unplug two con-
nectors (3P, 4P) in the rear.
5. Remove two screws and the Fusing Unit.
NOTE
The printer is hot immediately after it has been used.
Be careful not to get burned.
4108D007AB