Specifications

FrameMaker Ver.5.1(PC) SP-411 DISASSEMBLY AND CLEANING
98.07.21
D-4
No. Parts Name Removal Procedure
1 Access Cover Unhook the two tabs and remove the Access Cover.
2 Upper Metal
Bracket
Remove seven screws and metal bracket.
3 Upper Cover Remove two screws and remove the Upper Cover by lifting it
upward.
4 Vertical Transport
Door
Raise the stopper and open the Vertical Transport Door.
5 Fusing Unit Cover Open the Fusing Unit Cover.
6 1st Cassette Pushing the tab on the right rail, slide out the 1st cassette.
7 Front Option Cover Remove the Front Option Cover.
8 Front Cover Remove three screws and the Front Cover.
9 Left Cover Remove four screws and Left Cover.
10 Harness Cover Remove one screw and Harness Cover.
11 CN Cover Push the tab to remove the CN Cover.
12 Rear Option Cover Remove the Rear Option Cover.
13 Rear Cover Remove three screws and Rear Cover.
14 Control Board
Reinforcement Box
Remove 16 screws and the Control Board Reinforcement
Box.
15 Control Panel Unplug one connector from Controller Board and remove two
screws and the Control Panel.