Specifications

C-8
PagePro25
2-2. Tray 2 (2nd Paper Cassette)
2-2-1. Taking up Paper
The power is transmitted from the transport motor (M2) as follows to take up paper from the 2nd paper cassette.
1 The transport motor (M2) turns counterclockwise
→
2 The idle gear turns clockwise.
→
3 The 1st cassette paper take-
up gear turns counterclockwise.
→
4 The 1st cassette idle gear turns clockwise. The transport clutch (CL1) turns ON.
→
Power is transmitted to the 2nd paper cassette.
→
The 2nd cassette paper take-up solenoid (SL21) turns ON.
→
5 Paper
Take-up Roller turns counterclockwise.
→
Paper is taken up.
→
6 ~ 8 The gear train turns.
→
9 The transport gear turns
counterclockwise.
→
Paper is taken up.
→
Paper is fed.
Note: The rotational direction is the one viewing from the front of the printer.
8
9
5
6
7
3
4
2
1
0
Double feed of paper in the 2nd paper cassette is
prevented by the separators of the paper cassette.
Synchronzing Roller
Transport Motor
(M2)
Transport clutch
(CL1)
Separators
PC Drum
Transfer Roller
Paper Take-up Roller
Paper
[2nd Paper Cassette]
Transport Gear
Synchronizing
Roller Sensor
(PC2)
Paper Take-up Roller
2nd Cassette Side Door
Detecting Sensor (PC23)
2nd Cassette Paper
Take-up Solenoid (SL21)
2nd Cassette Set
Switch (SW3)
2nd Cassette Paper Near
Empty Sensor (PC25)
2nd Cassette
Paper Empty
Sensor (PC22)