Specifications

C-4
PagePro25
2-1. Tray 1 (1st Paper Cassette)
2-1-1. Taking up Paper
The power is transmitted from the transport motor (M2) as follows to take up paper from the 1st paper cassette.
1 The transport motor (M2) turns counterclockwise
→
2 The idle gear turns clockwise.
→
The 1st cassette paper take-up
solenoid (SL1) turns ON.
→
3 The paper take-up roller turns counterclockwise.
→
Paper is taken up.
Note: The rotational direction is the one viewing from the front of the printer.
Double feed of paper in the 1st paper cassette is prevented by the friction produced with the separator pad.
2 PAPER FEED SECTION
3
2
1
PC Drum
Transfer Roller
Transport Motor (M2)
Synchronizing Roller
Paper Take-up Roller
Paper Synchronizing Roller
Sensor (PC2)
1st Cassette Paper Empty Sensor (PC4)
1st Cassette Paper Near Empty
Sensor (PC5)
Synchronizing Roller
Sensor (PC2)
Double Feed Sensor
Paper Take-up Roller
Separator Pad
1st Cassette Paper Take-up
Solenoid (SL1)
1st Cassette Set
Sensor (PC6)