User`s guide

3&3ULQWLQJ
6RIWZDU H
&RQQHFWLQJWRD3&
7 When prompted to select a manufacturer and model of
printer, choose Have Disk.
8 In the Install from Disk dialog box, type the full path name of
the directory in which the QMS Windows NT 4.0 printer
driver files are located, or choose Browse and locate the
directory.
9 Choose OK.
A list of QMS printers displays.
10 Select the printer you want to install, and choose Next.
11 When prompted, choose Replace Existing Driver, and then
choose Next.
12 When prompted for a printer name, either accept the dis-
played name or type a new one, and then choose Next.
13 When prompted for sharing information, choose either
Shared (and type a Share Name) or Not Shared, and choose
Next.
14 When prompted, select the operating systems of ALL com-
puters that will be printing to the printer, and then choose
Next.
15 When asked if you’d like to print a test page, choose either
Yes or No, and then choose Finish.
Re-installation Procedure
If a Microsoft Windows NT 4.0 or a QMS Level 2 Windows NT 4.0
printer driver has been previously installed, you must use the follow-
ing procedure to delete the files before installing a new printer driver.
1 Open the WIndows NT Explorer (from the Start>Programs
menu choose Windows NT Explorer).
2 Delete the printers(s) you want to replace or upgrade.
3 Install the new printers using the “Initial Installation” proce-
dure at the beginning of this section.
4 Reboot your workstation.