User`s guide

,QWURGXFWLRQ
406785%23ULQW6\VWHP*HWWLQJ6WDUWHG
,QWURG XFWLRQ
This chapter explains how to set up your QMS 2425/2425 TURBO
Print System for the first time.
It includes information on finding a good location for the printer,
unpacking and checking the shipment contents, installing a toner car-
tridge, loading the cassettes, turning the printer on, and printing a
start-up page.
)LQGLQ
J
D*R RG /R FDWLRQ
Your QMS 2425/2425 TURBO Print System operates in any comput-
ing environment with the following requirements.
7KH3ULQ WHU0XVW%H3ODFHG 
 Away from cooling and heating sources, extreme temperature
changes, direct sunlight, excessive dust, corrosive chemicals or
vapors, water pipes, refrigerators, any strong electromagnetic
field (such as that created by an air conditioner), and excessive
vibration. Don’t connect it to the same electrical outlet as noise-
generating equipment.
 In an area with a temperature range of 50° - 90.5° F/10° - 32.5°C
and relative humidity range of 5% - 90% with no condensation.
 On a hard, level surface capable of supporting the 106 lb (48 kg.)
printer.
 Near your computer—6 feet (1.8 meters) or less for a parallel
connection.
 Close to an easily accessible power supply.
 In a well-ventilated room.