Specifications

$ER XW+ DUG
'LVNV
406785%2 3ULQ W6\VWHP2SWLRQV
(UURU0HVVDJHV
These messages may appear while you are using the Disk Opera-
tions menu.
)RUPDWWLQJD+DUG'LVN
After you have accessed the Administration/Disk Operations menu,
press the control panel keys in the order shown in the following table.
The printer responds by displaying a status message in the message
window (DSK refers to the hard disk, # is the hard disk number).
»Note: You may need to press the Next key one or more times to
advance through the list of selections or options.
Message Meaning Action
FORMAT FAILED
The hard disk cannot be
used.
Press the Menu key to
remove the message, and
contact your QMS vendor.
WRITE ERROR
The hard disk
encountered a write
error, or there is no room
for the data on the hard
disk or in RAM.
Press the Menu key to
remove the message, and
restart the operation from
the beginning.
Press this
key ...
to ... and the message
window reads ...
Select
Access the Disk Operations/Format
Disk menu
FORMAT DISK
Select
Access the Format Disk/Dsk#: menu.
DSK
# :
Next or
Previous
Advance through the list of attached
disks.
DSK
# :
Select
Select the disk and display a format
confirmation message.
ARE YOU SURE?
Select
Begin the formatting process. While
the system reboots, the hard disk is
being formatted.
FORMATTING...
Notify you when the formatting process
is complete. The printer then powers up,
and a start-up page prints (if enabled).
FORMAT COMPLETE