Specifications

$ER XW+ DUG

'LVNV

406785%2 3ULQ W6\VWHP2SWLRQV

▲ Caution:

If you connect to this printer an external hard disk you

previously used with an earlier QMS Crown printer (QMS 1660E, QMS

1725E, QMS 2025, or QMS 3225), this QMS 2425/2425 TURBO Print

System software release will automatically reorganize the files on the

hard disk when the printer is turned back on again. (The printer release

number is listed on both the start-up and the status page.) Once this

reorganization is done, the files on the hard disk can no longer be

accessed if the hard disk is reattached to an earlier QMS Crown printer.

This reorganization process takes time. If, when you first turn the printer

on after attaching a previously used hard disk, it does not come on line

immediately, be patient. Interrupting the reorganization process could

cause all files on the hard disk to be lost.

7XUQLQJR QDQ([WHUQDO+DUG'LV N

For the printer to recognize one or more external hard disks, each hard

disk must be turned on before you turn on the printer. If the printer rec-

ognizes the disk(s) and the start-up page is enabled, check to ensure

that DISK ONLINE prints on that page. If the start-up page is not

enabled, print a status page and check to see if DISK ONLINE prints

on that page. (See chapter 4, “Printer Configuration,” of the

Reference

, for information on how to print a status page.)

If DISK ONLINE does not print, see the

Operation

guide, chapter 6, the

“External and Internal Disk Problems” section, for more information.

Properly installed disks will also appear in the “Options” section, of the

start-up page (if it’s enabled) and on the status page as %%disk

(where

is a 7 for an internal IDE hard disk and 0 - 6 (SCSI ID 5 is

reserved for the CrownCopy scanner) for any external SCSI hard disks,

depending on the SCSI ID set on the back of the hard disk.