Specifications

$ERXW+DUG
'LVNV
6WRUDJHDQG6FDQQLQJ'HYLFHV
([WHUQDO+DUG'LVNV
Your printer supports up to 3 external SCSI hard disks. For informa-
tion on installing your external SCSI hard disk, see the documentation
that comes with your hard disk.
See FAQ 7181 for a list of each approved hard disk, its manufacturers
and part numbers, and the QMS products on which it can be used.
You can access QMS FAQs through the Internet at
http://www.qms.com/support/supportbase/, or through Q-FAX. (See
appendix A, “QMS Customer Support,” to find out how to access Q-
FAX documents).
»Note: FAQ numbers may be subject to change, so you may want to
obtain a directory of Q-FAX documents before requesting a specific
document.
,GHQ WLI\LQJ+DUG'LV NV
The hard disks are identified by their device numbers. If an optional
internal hard disk is attached it has a device number of DSK7. If
optional external hard disks are attached to the printer, their device
numbers can range from DSK0 this to DSK6. (DSK5, which translates
to SCSI ID 5, is reserved for the scanner). Device numbers of external
disks can be set on the back of the hard disk by the installer.
»Note: If the internal hard disk is removed or an external hard disk is
not turned on, the printer does not reset non-volatile RAM to the
factory defaults.