Specifications

$ER XW+ DUG
'LVNV
406785%2 3ULQ W6\VWHP2SWLRQV
3 Remove the hard disk.
Place your left hand on the metal interface plate, place the thumb
on your right hand on top of the hard disk, place the other fingers
on your right hand underneath the corner of the hard disk, and
then pull up very firmly on the hard disk. The disk is firmly seated,
so it may take several tries to remove it.
4 Pull the ribbon cable connector away from the connector
pins.
▲ Caution: Do not push or pull from the ribbon cable; use the cable
connector.
5 Attach another hard disk, if necessary.
6 Replace the controller board.
Use the instructions in chapter 2, “Memory,” the “Reinstalling the
Controller Board” section.
7 Reconnect all interface cables and the power cord, and then
turn on the printer.
...................................
...................................
..................
..................
.......................................
.......................................