Specifications

8VLQJ)RQ W
6,006
406785%2 3ULQ W6\VWHP2SWLRQV
4 Insert the SIMM into the font SIMM connector
Hold the SIMM at a 45° angle facing the bottom of the controller
board. Slide the SIMM into the Font SIMM connector, and then
push gently on it to seat it securely in the connector.
5 Snap the SIMM into place.
When seated, the SIMM stands upright, firmly in place. If you
cannot snap the SIMM into place, do not force it. Reposition it,
making sure that the bottom of the SIMM is seated completely in
the connector.
6 Insert the controller board in the printer.
Use the instructions in chapter 2, the “Reinstalling the Controller
Board” section.
7 Ensure that the Administration/Memory/Manual Config
memory client is at least 20 KB.
8 Access the fonts.
Most applications handle font selection for you.
...................................
...................................
...................................
...................................
..................
..................
.......................................
.......................................