Specifications

8VLQJ)RQW
6,006
6RIWZDUH
 Set the Administration/Memory/Disk Cache client to 20 KB after
installing the font SIMM, and also after performing an Administra-
tion/Memory/Quick Config.
▲ Caution: You may need to decrease one of the other memory
clients before increasing the Disk Cache client. This option
should be used only by individuals who are familiar with adjusting
memory settings. Improper use of this option could cause your
system to operate incorrectly.
,QVWDOODWLRQ3URF HGXUH
0 WARNING! Turn off the printer and unplug the power cord before
taking the cover off the printer.
ACHTUNG! Bitte schalten Sie den Drucker aus und ziehen Sie den
Netzstecker heraus bevor Sie die Druckerabdeckung öffnen.
▲ Caution: It's very important to protect the printer controller board and
other circuit boards such as SIMM boards, the Multi-Res
daughterboard, and so on from electrostatic damage while
performing this task. Review the anti-static guidelines in “Removing
the Controller Board,” earlier in this section.
Handle the SIMM carefully and preferably by the edges only.
1 Access the printer controller board
Use the instructions in chapter 6, the “Removing the Controller
Board” section, of the Reference .
2 Position the controller board so the interface panel is facing
you.
3 Remove the SIMM from the anti-static bag.