Specifications

2SWLRQDO
/RFDO7DON
,QWHUIDFH
406785%2 3ULQ W6\VWHP2SWLRQV
3 Connect the two transformer boxes with the telephone cable.
4 Put terminating resistors in all open sockets in the connec-
tor boxes.
This ensures proper communication and helps speed up trans-
mission.
5 Turn on the printer.
A start-up page should print if it has not been disabled.
0DFLQWRVK3ULQWLQJ6RIWZ DUH
If your Macintosh was previously connected to a PostScript printer,
you can probably start printing now with the printing software already
in place. Refer to your application documentation for instructions on
sending a document to the printer.
However, if you want to use all of your printer's special features (like
collation, 600x600 dpi printing), or if you've never printed to a Post-
Script printer before, you need to take a few minutes to make sure you
have the following printing software installed:
 The QMS 2425 PPD file
 Application-specific printer files
See chapter 5, “Connecting to a Macintosh,” in the Getting Started
manual for details on installing printing software.
7HVWLQJ0DFLQWRVK&RPPXQLFDWLRQ
You can check communication between the printer selected in the
Chooser and the Macintosh by sending a file to the printer from an
application (see your application documentation for more information)
or by printing a directory, as described here:
1 Display a disk or folder window.
2 Set up page information.
Choose Page Setup from the File menu. Select paper size, print-
ing orientation, and any other necessary options. Then select OK.