Specifications
8SGDWLQ J
6\VWHP
6RIWZDUH
406785%2 3ULQ W6\VWHP2SWLRQV
6 Select Yes in the New System Image menu.
The printer automatically reboots and waits for the new system
software (image) to be sent via your PC’s serial port (YES
remains in the message window until the new image is sent).
Type the following:
copy /b *.dl com
#
where
#
is 1 to 4. (/b refers to binary files.)
The Downloading process takes about 30 minutes depending on
the size of the file and the speed of your computer. The Ready
LED blinks as the new system image is copied to the printer.
7 While the system software is loading the Online and Copy
LEDs will blink off and on. The display will show
Downloading image
via serial port.
8 After the updated system software has been written to flash
ROM, the printer returns to IDLE.
»Note:
The new system image will not erase the old image until
the printer verifies that the new image is valid.
9 Restart the printer to activate the new system software.
10 Print another advanced status page, and verify that the con-
figuration settings are the same.