Specifications

8SGDWLQ J
6\VWHP
6RIWZDUH
406785%2 3ULQ W6\VWHP2SWLRQV
5 Follow the prompts.
They instruct you to insert the system software disks in the follow-
ing order:
a Last disk (system software disk 4)
b Disk 1 (system software disk 1)
c Disk 2 (system software disk 2)
d Disk 3 (system software disk 3)
e Disk 4 (system software 4)
6 Turn on the printer, wait for IDLE to appear in the message
window, and then print an advanced status page.
The advanced status page provides a record of all current config-
uration settings, so you can verify that they are the same or
recover your settings after the system software has been
updated.
'RZQOR DGLQJW KH6\V W HP6R IW ZDUH
—
3DUDOOHO
1 Access the Administration/Miscellaneous/New System
Image menu.
2 Select Yes in the New System Image menu.
The printer automatically reboots and waits for the new system
software (image) to be sent via your PC’s parallel port.
3 Send the new image to the printer.
Type:
copy /b *.dl lpt # ↵
where # is 1 to 3. (/b refers to binary files.)
4 While the system software is loading the Online and Copy
LEDs will blink off and on. The display will shows
Downloading image
via parallel port.