Specifications

6WDFNOHU

406785%23ULQW6\VWHP2SWLRQV

8VLQJWKH6WDFNOHU
The Stackler is now ready for use. We hope you enjoy the Stackler
with its giant output capacity, and exciting document finishing fea-
tures—including stacking, job offset, and stapling. See appendix B,
“Technical Specifications,” in the Reference manual, for stack capac-
ity information.
For optimum Stackler use, remember don’t
 Rest objects on top of the Stackler trays.
 Touch the Stackler trays during operation.
 Put your hand all the way into the stapler compartment unless
instructed to do so.
After installing the Stackler, you should print a test staple page to
ensure that the staple cartridge is adequately advanced. To print a
test staple page, select one of the Stackler output bins as the default
output bin (Operator Control/Outputbin menu), and then print a status
page by pressing the Status Page key on the printer control panel.
If the staples do require advancing, you will see a series of up to 12
staples placed along the side of the sheet. If the staples were
advanced correctly, no staples will be placed on the sheet. If the sta-
ples were not advanced correctly, refer to the “Replacing the Staple
Cartridge” section of this addendum.