Specifications

6WDFNOHU
'RFXPHQW)LQLVKLQJ2SWLRQV
3 Make sure that the pins on the new ROM chip are aligned
with the grooves on the socket.
4 Gently insert the new ROM chip into the socket.
If you feel any resistance, check that the pins are positioned
directly over the sockets and that they are properly aligned.
▲ Caution: Do not force the ROM chip into the socket.
5 Install the Option Controller Board
Follow the steps in chapter 3, the “Installing the Option Controller
Board” section of this manual.
6H OHFWWKH/RFDWLRQ
Locate the printer according to the instructions given in chapter 2 of
the Getting Started guide. Install the printer and the Stackler on a
hard, flat surface, so that they are level with each other.
▲ Caution: For proper installation of the Stackler, the printer must be
installed on either an optional high-capacity input paper deck or an
optional pedestal stand. Installing the printer and the Stackler at
different levels may prevent paper transport. Allow ample space
around the Stackler so that it can be used correctly.