Specifications

6WDFNOHU
'RFXPHQW)LQLVKLQJ2SWLRQV
6 WDFNOHU
The Stackler is a 2000-sheet output finisher offering exciting docu-
ment finishing features—including stacking, job offset, and stapling. It
has three addressable output stacking bins. Each bin can be config-
ured to support stapled output, or simple stacked and offset stacked
output—making print jobs easy to manage and retrieve in large work-
group environments.
)HDW XUH V
The following main features are supported on the Stackler.
 3 Large-capacity output trays
Two of these trays holds up to 700 sheets. See appendix B, the
“Stack Capacity” section, of the Reference guide for information
on the maximum capacity for each tray.
 Reverse paper delivery
This feature collates the media in the correct order and delivers it
face-down. The Stackler supports three modes for face-down
media delivery: simple stacking, job offset, and stapling.
»Note: When using the collation with other features, such as
stapling, ensure that the collation is disabled in your Windows
application Print dialogue box but enabled in the QMS printer
driver.
 Straight paper delivery
This feature delivers the media face-up. It is ideal for special
media. Only simple stacking is supported for face-up media deliv-
ery. See appendix B, the “Stack Capacity” section, of the Refer-
ence guide for information on which modes are supported on
each output tray.
 Job offset
This feature offsets the first page of each job by sliding it to one
side. Subsequent pages of the job aren’t offset.