User`s guide

Defines the second character that the controller is to ignore when pro-
cessing MAGNUM print jobs. If your host sends extra characters with
your data stream that have no effect on the printer, setting this option
will improve processing time.
Stipulates whether each carriage return (CR—hex 0D) in the print job
is translated to a carriage return/line feed combination (CR/LF—hex
0D/hex 0A).
Stipulates whether each line feed (LF—hex 0A) in the print job is
translated to a carriage return/line feed combination (CR/LF—hex 0D/
hex 0A).
Menu Administration/Emulations/MAGNUM/Misc/Set 2ND Ignore
Choices 0 to FF
Default 0
Notes Ignores characters set in hexadecimal.
Menu Administration/Emulations/MAGNUM/Misc/CR=CR+LF
Choices On—Translates all carriage returns to a carriage return/line
feed combination.
Off—Use carriage returns only as carriage returns.
Default Off
Menu Administration/Emulations/MAGNUM/Misc/LF=CR+LF
Choices On—Translates all line feeds to carriage return/line feed
combinations.
Off—Use line feeds only as line feeds.
Default Off