Setup guide
17
.kÅÎkÂÌ@bÌ1kÅÎÌÎ kÌ/àÅÎk
Register your 2001 and try out the system at the same time
by faxing the registration document to QMS:
1 In QMS Manager, from the Window menu, choose
Document Storage.
2 In the Document Storage window, select REGCARD.
3 Choose the Send button on the button bar.
4 In the Send Document dialog box, select QMS Regis-
tration Card in the Phone List box.
5 Choose the Add button to add QMS Registration
Card to the Send To list.
6 In the Dialing Prefix text box, if necessary, type 9 (or
whatever prefix you must normally dial to get an out-
side line) followed by a comma. The comma makes
the modem pause long enough for the outside-line
dial tone.
If you’re going to need a dialing prefix (such as 9,) for most
of your faxes, you can have QMS Manager add it for you.
Choose Prefer-ences from the Options menu in QMS
Manager, then type the prefix in the Dialing Prefix text box
and select the 8VH'LDOLQ J3UHIL[ checkbox. Choose the Help
button for more information on options in that dialog box.
7 Choose OK to send the REGCARD information to our
toll-free number.
8 Skip to “Where To Go From Here” on page 20.