Specifications

If you receive an emulation error, you may need to increase the amount

of memory for the K Mem For Emulation memory client. See chapters

4, “Printer Configuration,” and 5, “Additional Technical Information,” in

the

Reference

for more information on the Emulation memory client.

If the printer port is set for PostScript or ESP, increase the PS Heap

value (Administration/Memory/PS Heap menu) to at least 1536 KB and

reprint the job. See chapters 4, “Configuration Menu,” and 5, “Additional

Technical Information,” in the

Reference

for more information on PS

Heap.

If you’re using a Level 1 driver in your application and you have trouble

printing PostScript files, try printing the files with the PostScript level

set to Level 2 (Administration/Emulations/PostScript menu). See chap-

ter 4, “Printer Configuration,” of the

Reference

for more information.

Have you recently performed a system upgrade (release 2.0

or later firmware) on your QMS 1660 Print System and are

now unable to access your downloaded fonts?

Some fonts stored on your printer’s hard disk are copy-protected.

Therefore, when you upgrade the system software (release 2.0 or

later firmware), these fonts must be downloaded again for the