Specifications

chapter 6, “Printer Options,” in the
Reference for installation
instructions.
On an AppleTalk network, Macintosh computers sometimes inter-
fere with each other. If this happens often, reinstall the Laser-
Writer and Laser Prep files to reset the printer. If neither of these
files is the problem, contact your QMS vendor.
If a PAPER JAM message displays in the control panel message win-
dow
Open the printer and clear the jam. If the message is still there,
try opening and closing the front cover of the printer again.
As a last resort, try turning the printer off and on (this causes jobs
to be lost).
If you’re printing via the multipurpose tray, does the printer do any of
the following?
A PAPER SIZE MISMATCH error displays in the control panel
message window.
The printer partially prints the page (approximately 0.25"/
6.35 mm) and leaves the other part of the page blank.
The printer ejects the page.
The printer aborts the print job.
If one of these things happens, do the following:
Check to make sure that you aren’t using perforated or 3-hole-
punched paper. These types of paper are not recommended for
your QMS 1660 Print System.
Make sure the correct size paper is set in the Operator Control/
Multipurpose Sz menu.