Specifications

* Baud rates of 19200 and 38400 require that both RTS and CTS
hardware flow control ((Administration/Communications/Serial/Hdwe
Flow Ctl menu) be selected. These baud rates do not support XON/
XOFF software flow control )Rcv Sw Flow Ctl).
3 Next access the Administration
menu.
CONFIGURATION
ADMINISTRATION
4 Select enter the Administration
menu.
ADMINISTRATION
COMMUNICATIONS
5 Select enter the Communications
menu.
COMMUNICATIONS
TIMEOUTS
6 Next access the Serial menu. COMMUNICATIONS
SERIAL
7 Select enter the Serial menu. SERIAL
MODE
8 Next access the Baud Rate menu. SERIAL
BAUD RATE
9 Select enter the Baud Rate menu. BAUD RATE
*9600 BAUD
10 Next (one or
more times)
display the correct baud rate.* BAUD RATE
# BAUD
11 Select select the displayed baud
rate.
#
IS SELECTED
SERIAL
BAUD RATE
12 If you need to change other settings, press the Next key to access
the appropriate menu, then repeat steps 9-11 to find and select the
new settings.
13 Online/Offline Access the Save Changes
menu.
SAVE CHANGES?
NO
14 Next Access the Yes option. SAVE CHANGES?
YES
15 Select Save your changes. IDLE
16 Online/Offline Put the printer back on line
(the Online/Offline indicator
lights).
IDLE