Technical information

Allows you to specify which jobs are printed first, according to the
interface through which they are received, when jobs are received
simultaneously. In other words, you can give jobs received via the
parallel interface priority over jobs received via other interfaces.
Sets the binary communications protocol (BCP) for communicating
over a parallel interface to a PostScript printer. See chapter 5, “Addi-
tional Technical Information,” for a full discussion of PS Protocol.
Menu
Administration/Communications/Parallel/Def Job Prio
Choices
001-100 (highest-lowest priority)
Default
001 (highest priority)
Menu
Administration/Communications/Parallel/PS Protocol
Choices
Normal—Enable standard, ASCII hex protocol. Data is
sent and received in ASCII format. This mode is
recommended if you do not print binary data. It was
designed for data in the printable ASCII range. Print jobs
can alter the PS protocol value through PostScript
operators.
Normal Fixed—Enable standard, ASCII hex protocol.
Print jobs cannot alter this value through PostScript
operators.
Binary—Enable binary communications protocol. Print
jobs can alter this value through PostScript operators.
Data in the printable ASCII range also print.
Binary Fixed—Enable binary communications protocol.
Print jobs cannot alter this value through PostScript
operators. Data in the printable ASCII range also prints.
Default
Normal