Technical information

Indicates the default line termination mode. This setting specifies the

treatment of line feeds and carriage returns. (See Appendix E, “Man-

ual Updates” for more information on line termination).

Sets the point size for scalable default fonts in units of hundreths of a

point. For example, a 24 point default point size is selected by enter-

ing 2400. The smallest increment allowed in point size is .25 point (for

example, 8.5 point and 8.75 point fonts are allowed, but 8.6 point is

not).

Administration/Emulations/PCL 5/Line Termination

Choices

CR=CR LF=LF

CR=CR+LF LF=LF

CR=CR LF=CR+LF

CR or LF=CR+LF

Default

CR=CR LF=LF

Administration/Emulations/PCL 5/Point Size x100

Choices

00025-99975 (0.25-999.75 points)

Default

01200 (12 points)

Notes

If the font is not scalable or if a bitmap font is specified,

the setting is ignored.