Specifications

Your printer requires a properly grounded AC outlet with a power
range of ±10% of the rated line voltage (120 V or 220/240 V). Noise-
generating equipment should not be connected to the same electrical
outlet as the printer. The recommended frequency is 47-63 Hz for
120 V system and 47-50 Hz for 220/240 V system.
▲ Caution: The supplied power cord is equipped with a 3-wire
grounding plug for safety purposes. Connect the plug to the proper
grounding-type power outlet.
The printer is compliant with US Environmental Protection Agency
(EPA) Energy Star regulations. After a specified period of inactivity,
the printer changes to a low-power state (the engine remains on, but
the fuser turns off). When a print job is received, the printer returns to
normal power within 90 seconds.
In addition to this manual, your shipment consists of the following
items:
QMS 1060 Print System (with multipurpose tray)
Paper feeder and standard 500-sheet letter/A4 cassette boxed
separately but banded to the printer unit’s box)
Paper stopper
Documentation
—QMS 1060 Print System Operation
— QMS 1060 Print System Reference
—QMS Crown Network Notes
(on disk)