Product guide

4
QMotion
UK Low Voltage shades off er all the same
features of QMotion
UK Battery powered shades,
and are compatible with fascia as well as controls.
• Battery tube is replaced with transformer leads.
• Each shade comes with a 600mm wire lead.
• Tube is confi gured to convert low voltage into the
proper level to power the shade.
• Power supply options are available to power one
shade or multiple shades.
• The power supply can be at the header with
the shade, on the fl oor near the shade or in an
equipment room several hundred feet away from
the shade.
QMotion
UK does not supply the wires from the
transformer to the shades. Recommended minimum
wire gauge requirements for distances between
power supply and shade or distribution box and shade
are as follows for the required 2 conductor cables.
*All QMotion UK Low voltage power systems may be attached into
a customer supplied battery back up system, in the case of
a site power event.
• In Single Shade Option, a plug-in power supply
provides 24v DC to the shade.
• Low voltage single shades are controlled with the
same wireless RF remote as the battery option
shades.
• With the Low Voltage Distribution Box the power
supply is designed to distribute the appropriate
power to as many as four shades.
• The power distribution panel can send power
individually to multiple shades (please contact
QMotion UK for further info). The panel also
provides protection against short circuit or
overload to individual shades.
Wire Gauge Requirements
• The system allows for shades with varying
voltage requirements to work together.
• QMotion UK Low Voltage shades continue to off er
the unique and patented manual override system.
Low Voltage Transformer Information
240V AC In
24V DC Out
Max 6.0 AMP Out
Electrical Panel Box
240V AC In
24V DC Out
Max 7.0 AMP Out
Distribution Box
**Table based on use of a 24v DC power supply.
**Consult a qualifi ed Electrical Contractor for their guidelines on
correct cable installation.
Distance of Cable (mtr.) Minimum Cable Size Required
0-90 0.75mm
90 - 150 1mm
Product Guide 2014 NEW.indd 7Product Guide 2014 NEW.indd 7 14/01/2014 15:0114/01/2014 15:01